Datasheet / Installation diagramsAED-2000-D1 incorporates two independent relay outputs that can switch various loads up to 10A. When AED-2000-D1 is connected and powered up, each relay (switch) is controlled by a separate sensor.
AED-2000-D1 has two touchless sensors. The left half of the surface is the first sensor, controlling the first relay. The right side is the second sensor, controlling the second relay. It is intended for installation in a standard 68mm round European wall box.
British Standard wall box (min. depth: 40mm) mounting option is also available. The switch requires a neutral connection and has no minimum load.
Important: If you intend to mount this unit into a round wallbox using screws, please choose the version with correct orientation, depending on the screw position in your wallbox:
Maxuimum load: 2x 10A
Minimum load: 0W
Voltage: 240V /50Hz
Detection range Adjustable: 2-6cm
Mounting: 68mm standard European wallbox (British Standard wall box option available)
Wire connection: Screw terminal for wires up to 2,5mm2