AED-2000-D1   DUAL TOUCHLESS SWITCH

Dual Touchless switch incorporates two independent relay outputs that can switch various loads up to 10A. Each relay (switch) is controlled by a separate sensor. The left half of the surface is the first sensor, controlling the first relay. The right side is the second sensor, controlling the second relay.

It is intended for installation in a standard 68mm European wallbox or in a British standard wallbox. The switch requires a neutral connection and has no minimum load.

You can choose any of the different switchplate we have available for the Touchless Directional Switch. As the switchplate does not have any function apart from the looks, many more custom switchplates can be designed and used. The switchplates are easily exchanged to fit perfectly into any interior and are fixed to the base unit with four strong magnets.

The Touchless Directional switch comes in two orientations, depending on the position of the mounting screws in your wall box: one for vertical mounting screws and one for the horizontal mounting screws. Please check the datasheet for more details.



Anigmo Dual Touchless switch
AED-2000-D1
Function Dual Touchless switch
Maximum load 2x4500 W
Minimum load 0W
Voltage 240V /50Hz
Detection range Adjustable, 2-5cm
Mounting 68mm standard wallbox
Wire connection Screw terminal for wires up to 2,5mm2
Learn more
Last updated Size
AED-2000-D1x Touchless Dual switch 10-Nov-2021 164 kb PDF
Anigmo logo bottom